Browse Shutter Guide
General
- Our Plantation Shutters
- Imported vs Local Plantation Shutters
- Why Choose Plantation Shutters?
- How Much Do Plantation Shutters Cost?
- Where Did Plantation Shutters Originate?
- Plantation Shutters vs Blinds
- Choosing the Best Shutter Material
- Plantation Shutters for Kitchens
- Are PVC Shutters Safe?
- How to Photograph Your Windows
Performance
Care
Frames
- Complete Guide to Shutter Frame Types
- Inside Z-Frame
- Inside L-Frame
- Outside L-Frame
- What Is an Inside Mount?
- What Is an Outside Mount?
Customisation
- Choosing the Right Shutter Colour
- A Guide to Shutter Panels
- Choosing the Right Panel Configuration
- Should Shutters Match Your Window Trim?
Mounting
- Inside vs Outside Mount Plantation Shutters
- What Type of Window Do I Have?
- What Is a Window Recess?
- Should I Inside or Outside Mount My Shutters?
- A Guide to Architraves
- What Is a Window Sill?
Tricky Windows
Getting Started
- Quick Measuring for a Shutter Quote
- How to Measure a Window Recess for Shutters
- Complete Guide to Measuring for Plantation Shutters
Midrails
Custom Panels
Inside Mount
- How to Measure Your Window Recess
- Measuring for an Inside Mount
- Measuring an Inside Mount Window with a Sill
- Managing Window Obstructions
Outside Mount
- Measuring for an Outside Mount
- Outside Mount Measuring with a Decorative Architrave
- Outside Mount Measuring for a Square-Set Window
Corner & Bay Windows
Our Service
- Our Plantation Shutters
- Why My DIY Blinds?
- What Does Our Shutter Warranty Cover?
- Our Plantation Shutter Product Guarantee
Quotes
Ordering & Product Setup
- Getting Started with Your Shutter Order
- How Shutter Product Recommendations Work
- Uploading a Photo of Your Window
Delivery
- Where We Deliver Plantation Shutters
- How Your Plantation Shutters Are Delivered
- What to Expect on Delivery Day
Measure Guarantee
Self Review
How to Measure a Window Recess for Shutters
Recess depth tells you how much clear space is available for an inside-mounted shutter.
Check your recess depth before measuring
As a simple guide, allow approximately 70mm of clear recess depth for an inside-mounted plantation shutter. Check the shallowest usable depth and measure to the first obstruction that could interfere with the shutter, such as a handle, winder, lock, key, flyscreen or other window fitting.
If you have around 70mm or more of clear space, you can generally continue with the inside-mount measuring instructions.
Have less than 70mm, or an obstruction in the recess? An inside mount may still be possible depending on the frame choice and where the obstruction sits. See our Managing Window Obstructions guide for the detailed clearance requirements.
Find the front reference point
Measure from the front face of the recess inward toward the window. Use the same reference plane around the whole opening.
Examples of obstructions
Security boxes, locks, winders, and handles.
Measure to the first obstruction
Stop at the first handle, lock, flyscreen, mullion or moving window part that could conflict with the shutter. This is the usable depth.
Check several locations
Measure near the top, centre and bottom on both sides. Use the shallowest clear measurement when checking frame suitability.
Operate the window
Open the sash and use the handle or winder. Make sure the moving parts do not enter the space you are counting as clear depth.
Before ordering: if your recess is less than approximately 70mm deep, or contains handles, winders, locks, flyscreens or other obstructions, check our Managing Window Obstructions guide before finalising your inside-mount measurements.
Was this article helpful?
Related articles
Still need a hand?
Send us your window measurements and photos if you are unsure about the right shutter setup.