Browse Shutter Guide
General
- Our Plantation Shutters
- Imported vs Local Plantation Shutters
- Why Choose Plantation Shutters?
- How Much Do Plantation Shutters Cost?
- Where Did Plantation Shutters Originate?
- Plantation Shutters vs Blinds
- Choosing the Best Shutter Material
- Plantation Shutters for Kitchens
- Are PVC Shutters Safe?
- How to Photograph Your Windows
Performance
Care
Frames
- Complete Guide to Shutter Frame Types
- Inside Z-Frame
- Inside L-Frame
- Outside L-Frame
- What Is an Inside Mount?
- What Is an Outside Mount?
Customisation
- Choosing the Right Shutter Colour
- A Guide to Shutter Panels
- Choosing the Right Panel Configuration
- Should Shutters Match Your Window Trim?
Mounting
- Inside vs Outside Mount Plantation Shutters
- What Type of Window Do I Have?
- What Is a Window Recess?
- Should I Inside or Outside Mount My Shutters?
- A Guide to Architraves
- What Is a Window Sill?
Tricky Windows
Getting Started
- Quick Measuring for a Shutter Quote
- How to Measure a Window Recess for Shutters
- Complete Guide to Measuring for Plantation Shutters
Midrails
Custom Panels
Inside Mount
- How to Measure Your Window Recess
- Measuring for an Inside Mount
- Measuring an Inside Mount Window with a Sill
- Managing Window Obstructions
Outside Mount
- Measuring for an Outside Mount
- Outside Mount Measuring with a Decorative Architrave
- Outside Mount Measuring for a Square-Set Window
Corner & Bay Windows
Our Service
- Our Plantation Shutters
- Why My DIY Blinds?
- What Does Our Shutter Warranty Cover?
- Our Plantation Shutter Product Guarantee
Quotes
Ordering & Product Setup
- Getting Started with Your Shutter Order
- How Shutter Product Recommendations Work
- Uploading a Photo of Your Window
Delivery
- Where We Deliver Plantation Shutters
- How Your Plantation Shutters Are Delivered
- What to Expect on Delivery Day
Measure Guarantee
Self Review
How to Install Outside Mount Plantation Shutters
Outside-mount shutters are fixed to the wall or architrave around the opening, so careful frame positioning is essential before the first permanent fixing.
Preparation
Check that the finished frame dimensions match the intended opening and that the mounting surface is clear. Group the labelled frame and panel components for that window.
1. Assemble the frame
Join the frame on a flat surface and keep the corners fully seated.
2. Centre and level the frame
Hold the assembled frame over the opening. Check the top is level and the side margins are positioned as planned.
3. Fix the top and establish square
Use initial fixings to support the frame without fully tightening every point. Measure diagonals or use a square to establish the frame geometry.
4. Fix the sides and bottom
Work around the frame gradually. Pack behind low spots so the wall or architrave does not distort the frame.
5. Hang the panels
Fit panels to their labelled hinge positions and test movement.
6. Fine-tune
Adjust frame packing or hinge alignment until panel gaps are even and the panels close cleanly.
7. Finish
Fit cover caps or strips, remove protective material and test the louvres and underlying window.
Was this article helpful?
Related articles
Still need a hand?
Send us your window measurements and photos if you are unsure about the right shutter setup.